Konica Minolta bizhub PRESS C8000e - Manual (Page 337)

bizhub PRESS C8000 10-29
10.3 [02 User Setting] - [01 System Setting] 10
10.3 [02 User Setting] - [01 System Setting]
10.3.1 [04 Reset Setting] - [02 Job Reset Setting]
The following features can be provided by switching the selection.
Menu item Description Setting options (with
default bolded)
[Change User] Specify whether or not to initialize the settings
currently specified when the machine decides
that the user has changed. When one of the fol-
lowing operations is performed, this machine de-
cides that a user has changed:
Removing the key counter or copy card
Pressing Access on the control panel after us-
er/account authentication has been successfully
performed ON, OFF
[ADF Original Direction] Specify whether or not to initialize the settings
currently specified when the original document is
loaded into the ADF. Reset, Not Reset
[Reset Button Function] Select either the factory default setting (Full Auto)
or the desired copy conditions (Initialize) as the
one to be resumed when the machine is reset. Of
the Full Auto settings, the finisher mode can be
changed in [Finisher Mode when Full Auto] as re-
quired. Initialize, Full Auto
[Mode Memory Auto
Call] Select whether to resume the setting specified by
selecting [02 User Setting] - [02 Initial Setting] -
[01 Copy Initial Setting], or to resume the copy
conditions registered to Mode Memory [30], both
of which are to be used as the initial setting when
Initialize is selected in Reset Button Function. Se-
lect [ON] to resume the former, or [OFF] to resume
the latter. ON, OFF
[Finisher Mode when
Full Auto] Specify the finisher function to be used as [Full
Auto], when selected in Reset Button Function. Offset Sort, Offset
Group, Sort, Group,
Staple Sort, Fold & Sta-
ple, Half-Fold, Face Up,
Face Down
[Initial by Key Counter
Insert] Specify whether or not to resume the initial set-
ting when the key counter or copy card is insert-
ed. ON, OFF
[Status Hold When Auto
Reset] Specify whether or not to resume the initial set-
ting for the original glass/ADF mode when the
machine is reset. Not Keep, Keep
[Next Job Staple Set-
ting] Specify whether or not to deselect the Staple
mode automatically when a job using Staple is
completed. Release, Do Not Re-
lease
[Original Set/Bind Direc-
tion] Specify whether or not to reset the Direction set-
ting made for the original and the Bind Direction
setting made on the Output Setting Screen after
completion of each job. Release, Do Not Re-
lease