Konica Minolta bizhub PRESS C8000e - Manual (Page 34)

bizhub PRESS C8000 2-22
2.7 To Stop Scanning/Printing 2
2.7 To Stop Scanning/Printing
Follow the procedure below to stop the job currently in process (scanning, printing, or both scanning and
printing).
0 This procedure is effective only for the job in progress. To stop reserved jobs on standby, navigate to
the Job List Screen.
1
Press Stop on the control panel while the current job is in progress.
The current machine operation of the selected job will be suspended, and a dialog will be displayed on
the Copy Screen.
2
Select the next operation for the suspended job.
% Press [Cancel Job] to cancel the job.
% Press [Continue] to resume the job.
% Press [Temporary Stop] to temporarily suspend printing. Press Start on the control panel to
resume the job.
% Press [Stop at a Set] to suspend the job when a set currently output is completed. Press Start on
the control panel to resume the job.
NOTICE
Descriptions provided in this guide suppose that the machine is equipped with Paper Feeder Unit
(with scanner) PF-705 and Hard Disk Kit HD-514. [Stop at a Set] is to be displayed on the machine
mounted with Image Controller IC-601 in addition to the above options.