Konica Minolta bizhub PRESS C8000e - Manual (Page 69)

bizhub PRESS C8000 3-31
3.6 Paper Setting 3
3.6 Paper Setting
This section describes how to make a paper setting for each tray. Feature descriptions and usage of Auto
Paper and Image Rotation are also provided.
3.6.1 Paper Setting Outlines
The paper setting offers two types of usage depending on what the setting is intended for.
One is to make the setting for a paper tray which needs paper conditions specified.
The other is to register paper conditions for the paper to be used.
This section describes how to make the setting for a paper tray.
d
Reference
For the paper setting to register paper conditions for the paper to be used, see Section 9 of the User's Guide
- Main Body.
%
Paper conditions specified for a paper tray can also be registered. That procedure is provided in this
section.
The paper setting can be made for the following trays:
-
Main body trays (trays 1 to 3)
- Trays of Paper Feeder Unit PF-704 (trays 4 to 9)
- Trays of Paper Feeder Unit (with scanner) PF-705 (trays 4 to 6)
-
Upper tray/lower tray of the post inserter of Folding Unit FD-503 (PI 1, PI 2)
-
Upper tray/lower tray of Post Inserter PI-502 mounted on Finisher FS-612 (PI 1, PI 2)
- Cover tray of Perfect Binder PB-503 (PB)
The paper setting for a paper tray consists of the following conditions that can be specified as desired.
Setting item Description Setting options
Paper Type The following seven paper types are
provided according to the plainness
of paper.
See the table "Paper type descrip-
tions" provided below for details of
the paper type.
You can set the machine to accept
thin coated paper in each tray in or-
der to use the coated paper thinner
than normal. For details, see Sec-
tion 9 of the User's Guide - Main
Body. Plain, Fine, Color Specific, Coated-GL,
Coated-ML, Coated-GO, Coated-MO
Profile Name No entry can be made in setting the
paper conditions for the tray to be
used. Enter the paper file name
when you register the paper condi-
tions specified for a tray. Up to 50 alphanumeric characters includ-
ing symbols can be entered for the name.
Paper Size Selecting Standard automatically
detects the standard size of paper
loaded in the selected tray.
Selecting Custom allows you to en-
ter the desired dimensions from the
screen. This setting can also be
made by recalling a custom size
previously registered.
To specify Tab Paper, select either
A4T
v or 8.5 e 11T v and specify the
number of tabs.
Detectable standard sizes vary depending
on the paper tray.
Custom:
Min. 140 mm
e 182 mm to max. 330 mm e
487 mm for trays 1 to 3
Min. 100 mm
e 140 mm to max. 330 mm e
487 mm for trays 4 to 9
Min. 182 mm
e 139 mm to max. 331 mm e
483 mm for the post inserter of Folding
Unit FD-503
Min. 182 mm
e 139 mm to max. 314 mm e
297 mm for Post Inserter PI-502
Up to 20 custom sizes can be registered
and recalled.
Tab Paper:
A4T
v, 8.5 e 11T v (number of tabs: 1 to
15)