Heidolph LABOROTA 4000 up to 4003 - Manual (Page 107)

Setup and initial use
1.02 Laborota 4000/4001 efficient, 4010/4011 digital, 4002/4003 control 105
Fig. 4-29: VAC senso T / ROTAVAC vario control power supply
A VAC senso T 6 vacuum connector
B ROTAVAC vario control 7 aeration/inert gas
1 main power switch 8 power connection
2 LED 9 Laborota 4002 / 4003
connection
3 locking screws 10 ROTAVAC vario control vacuum
pump
4 VAC senso T / Rotavac vario
control connection
11 vacuum valve
5 bolt 12 vacuum switch box
1. Remove the positioning screws (3) from the locking tubes on the back of
the instrument.
2. Insert the VAC senso T / ROTAVAC vario control power supply and
bolts (5) into the locking tubes.
3. Secure the power supply with the positioning screws (3).
4. Establish connections (4, 6, 8, 9, 10, 11, 12).
VAC senso T /
Rotavac vario
control power
supply (Laborota
4002 / 4003 control)