Heidolph LABOROTA 4000 up to 4003 - Manual (Page 140)

Appendix
138 Laborota 4000/4001 efficient, 4010/4011 digital, 4002/4003 control 1.02
11.4 EU Declaration of Conformity
We, Heidolph Instruments GmbH & Co KG, hereby declare that the products
Laborota 4000 / 4001 efficient, 4010 / 4011 digital and 4002 / 4003 control
comply with the following standards and normative documents:
EMC directives:
EN 61326: 1997 + A1:1998 + A2:2001+ A3 2003
EN 61000-3-2: 2000
EN 61000-3-3: 1995 + 1997 + A1:2001
EN 61000-4-2:1995 +A1:1998+A2:2001
EN 61000-4-3:2002 +A1:2002
EN 61000-4-4:1995 +A1:2001 + A2:2001
EN 61000-4-5:1995 +A1:2001
EN 61000-4-6:1996 +A1:2001
EN 61000-4-11:1994 + A1:2001
Low-voltage directive:
EN 61010-1 + EN 61010-2-010
Modifications to the instrument without our prior approval will void this
Declaration.
Date: 26.02.2007
Signature
Name of the signatory Günter Vollgold
11.5 Warranty
Heidolph Instruments provides a three-year warranty on the products
described herein (with the exception of glass and consumable parts) subject to
registration using the enclosed warranty card or via the Internet
(www.heidolph.com). The warranty period begins at the time of registration.
Without registration, the serial number of the instrument shall apply. This
warranty covers defects in materials and workmanship. Transit damage is
excluded from this warranty.
To obtain such warranty service, contact Heidolph Instruments (phone:
+49 – 9122 - 9920-69) or your local Heidolph Instruments Dealer. If defects in
material or workmanship are found, your item will be repaired or replaced at no
charge.
Misuse, abuse, neglect or improper installation are not covered by this
warranty promise.