INFICON 3000 Micro GC Gas Analyzer Reference Guide - Manual (Page 107)

23 - 3
PN
07
4-
55
8-
P1
A
3000 Micro GC Guides
11 Next, connect both Plug B connectors to Position 3.
12 Connect the Plug C connector to Position 2.
13 Install the top cover of 3000 Micro GC.
14 Turn the 3000 Micro GC power switch, located on its front, to the on position. The switch will
illuminate green to indicate that 3000 Micro GC is on.
Wait three minutes for the instrument to load.
Table 23-1 Replacing the battery cable fuse on a portable instrument (continued)
Step Description