INFICON 3000 Micro GC Gas Analyzer Reference Guide - Manual (Page 20)

3 - 2
PN
07
4-
55
8-
P1
A
3000 Micro GC Guides
6 Type the desired changes to the IP address and click Submit.
NOTE: Consult an IT professional to assist with IP settings.
7 A window will prompt the user to restart the instrument:
Click Restart. Allow three minutes for the instrument to update configuration files.
CAUTION
Do not turn off the power without waiting three minutes.
3000 Micro GC must update configuration files before power is
turned off. If power is turned off too soon, the files could be
corrupted and render 3000 Micro GC unusable.
8 Connect to the instrument using the new IP address.
Click (Windows) Start >> Run.
9 In the Run window, in the Open: box, type the new IP address. Click OK.
Table 3-1 Changing the Instrument IP Address (continued)
Step Description