INFICON 3000 Micro GC Gas Analyzer Reference Guide User Manual
Page 24
Advertising
4 - 2
PN
07
4-
55
8-
P1
A
3000 Micro GC Guides
6
Under Connection, select the carrier gas connection that corresponds to the desired GC
module. Click Submit.
NOTE: Entries m1 and m2 represent channels A and B, respectively.
Entries m3 and m4 represent channels C and D, if installed.
NOTE: In the example shown above, carrier1 is assigned to modules m1 and m2.
Carrier2 is unused.
7
Select the new carrier gas type from the drop-down list. Click Submit.
8
The column heaters will turn off to avoid thermal shock and degradation. Click Check Status to
view the current column temperatures.
Table 4-1 Changing the carrier gas configuration (continued)
Step
Description
Advertising