INFICON 3000 Micro GC Gas Analyzer Reference Guide User Manual
Page 32
6 - 2
PN
07
4-
55
8-
P1
A
3000 Micro GC Guides
5
Double-click the INFICON 3000 Micro GC icon in the Configured modules panel to open the
INFICON 3000 Micro GC Configuration window.
6
On the INFICON 3000 Micro GC Configuration window. Click the Connectivity tab. In the
IP address: box, type the IP address of 3000 Micro GC. Click Load Configuration from GC….
Once the 3000 Micro GC configuration has been properly loaded into EZ IQ, a Configuration
loaded successfully from GC device or GC Configuration Available message will display.
7
Click OK to exit the INFICON 3000 Micro GC Configuration window.
8
Click OK to exit the INFICON 3000 Micro GC Enhanced Driver window.
9
Click OK to exit the Instrument Configuration window.
10
Click Close to exit the EZ IQ Configuration window.
Table 6-1 Configuring 3000 Micro GC with EZ IQ (continued)
Step
Description