INFICON 3000 Micro GC Gas Analyzer Reference Guide - Manual (Page 73)

18 - 7
PN
07
4-
55
8-
P1
A
3000 Micro GC Guides
18 Inspect the GC module mounting flange fitting to verify all new O-rings on the replacement
GC module are undamaged and seated flat.
19 Use a wrench to loosen the protective 1/4 in. cap over the GC module inlet fitting.
Table 18-1 Changing a standard module (continued)
Step Description
Verify O-ring placement
Mounting flange
Gang block, upper half