INFICON 3000 Micro GC Gas Analyzer Reference Guide User Manual
Page 93
Advertising
20 - 7
PN
07
4-
55
8-
P1
A
3000 Micro GC Guides
19
Inspect the GC module mounting flange fitting to verify all new O-rings on the replacement
GC module are undamaged and seated flat.
20
Remove the protective 1/4 in. cap over the GC module inlet fitting.
Table 20-1 Changing a standard module (continued)
Step
Description
Verify O-ring placement
Mounting flange
Gang block, upper half
Advertising