INFICON 3000 Micro GC Gas Analyzer Reference Guide User Manual
Page 83
Advertising
19 - 5
PN
07
4-
55
8-
P1
A
3000 Micro GC Guides
12
Inspect the GC module mounting flange fitting to verify all new O-rings on the replacement
GC module are undamaged and seated flat.
13
Remove the protective 1/4 in. cap over the GC module inlet fitting.
Table 19-1 Changing a Performance Enhanced module (continued)
Step
Description
Verify O-ring placement
Mounting flange
Gang block, upper half
Advertising