INFICON SQM-160 Thin Film Deposition Monitor User Manual
Page 53
4 - 5
IP
N 07
4-
51
1-
P1
C
SQM-160 Operating Manual
Append . . . . . . . . . . . . . . . . . . . . . . Data is added to the end of the log file each
time data logging is started with the Start or
Open Shutter switch.
New . . . . . . . . . . . . . . . . . . . . . . . . . Displays a file open dialog box, to allow
selection or creation of a new log file.
View . . . . . . . . . . . . . . . . . . . . . . . . . Displays the current log file using the default
Windows text file viewer.
Start Time . . . . . . . . . . . . . . . . . . . . The elapsed time when data logging begins.
The right value is seconds, the middle value
is minutes, and the left value is hours.
End Time . . . . . . . . . . . . . . . . . . . . . The elapsed time when data logging ends.
The right value is seconds, the middle value
is minutes, and the left value is hours.
Log Interval . . . . . . . . . . . . . . . . . . . The elapsed time between data log entries,
in seconds. An interval value of zero causes
data to be logged as quickly as possible.
This time will vary depending on system
configuration.
Once communications have been established, follow these steps to start data
acquisition:
1
Select the desired film from the list of SQM-160 films.
2
Press Zero to zero the Monitor's thickness reading (optional).
3
Press Open Shutter to start data acquisition.