2 how to change the ip address of the sqm-160, 2 sqm-160 comm software – INFICON SQM-160 Thin Film Deposition Monitor User Manual
Page 65
5 - 5
IP
N 07
4-
51
1-
P1
C
SQM-160 Operating Manual
5.1.3.2 How to change the IP address of the SQM-160
The IP address of the SQM-160 can be changed using the Dgdiscvr program on
the CD-ROM. To change the IP address:
1
Run dgdiscvr.exe and find the SQM-160 (it may take a minute, click Refresh.)
2
Double-click on SQM-160 (should be highlighted.)
3
Enter User Name: root and Password: dbps.
4
Click Login.
5
Click Configuration, Network and set.
6
1 - Change IP=192.168.1.200 to your new IP address.
Click Apply, then Log Out. The new IP address is now configured.
5.2 SQM-160 Comm Software
SQM-160 Comm software is found on the 074-5000-G1 Thin Film Instrument and
Manuals CD supplied with your SQM-160.
This program provides real-time instrument control and process data logging. Data
can be graphed and saved in a spreadsheet format.
For more information and installation instructions on SQM-160 Comm software,
refer to
Chapter 4, SQM-160 Comm Software
.