Lenze E84DGFCC User Manual
Page 18
Communication manual 8400 motec CANopen
Product description
Connections and interfaces
18
L
EDS84DMOTCAN EN 3.0 - 11/2011
By default, the CANopen connectors are already pre-assembled and wired with the
terminal strip X3.
The CANopen connections and further connections (e.g. digital inputs) can be freely
designed at the positions A1 ... A4 and B1 ... B4..
The connections can be equipped with 5-pole M12 connectors, or optionally with cable
glands (cable cross-section max. 1.0 mm
2
, AWG 18).
The M12 connectors, cable glands and prefabricated system cables can be obtained
from various manufacturers.
Wire the M12 connectors or cable glands used to the corresponding contacts of
terminal strips X3, X4, and X61.
"Inverter Drives 8400 motec" hardware manual
Observe the notes and wiring instructions given in the documentation.