Lenze E84DGFCC - Manual (Page 35)

EDS84DMOTCAN EN 3.0 - 11/2011
L
35
Communication manual 8400 motec CANopen
Commissioning
Initial switch-on
6.5 Initial switch-on
Establishing communication
 To establish communication, the controller must be supplied with mains voltage.
 All parameters (codes) and DIP switch settings are read in when the device is switched
on.
 If an error occurs, the error message "CE04: MCI communication error" (error no.
01.0127.00002) is output.
 The positions of the DIP switches define whether the CAN node address and the baud
rate are selected via the DIP switches or via codes C00350 and C00351 .
 Possible settings via DIP switch
( 32)