Lenze E84Dxxxx User Manual
Page 30
EDS84DPBUS EN 2.0 - 09/2010
L
30
Communication manual 8400 protec PROFIBUS
Process data transfer
Preconfigured port interconnection of the process data objects (PDO)
7.2
Preconfigured port interconnection of the process data objects (PDO)
The preconfigured port interconnection of the process data objects is activated by setting
the standard device code C00007 = "40: MCI".
It is possible to display the port blocks "LP_MciIn" and "LP_MciOut" as well as the
preconfigured interconnections in the function block editor (FB Editor):
Note!
The »Engineer« screenshots shown on the following pages are only examples for
the setting sequence and the resulting screens.
Depending on the software version of the controller and of the installed
»Engineer« software, the screenshots may vary from your »Engineer«
representation.