3 settings and displays in the »engineer, Settings and displays in the »engineer, Communication manual 8400 protec profibus – Lenze E84Dxxxx User Manual
Page 66
Advertising
EDS84DPBUS EN 2.0 - 09/2010
L
66
Communication manual 8400 protec PROFIBUS
Monitorings
Settings and displays in the »Engineer«
10.3
Settings and displays in the »Engineer«
In the »Engineer« under the Monitoring tab you can ...
set a response
) to an interruption in communication.
set a monitoring time
(
) for the "Data_Exchange" status.
display the watchdog monitoring time
If the Inverter Drive 8400 protec does not receive any valid process data when being in the
DATA_EXCHANGE state, the process data are handled according to the setting in
. (Thus, the data sent last by the master can be used or set to zero.)
Advertising