Lenze E84Dxxxx - Manual (Page 39)

Communication manual 8400 protec PROFIBUS
Parameter data transfer
DP-V0 parameter data channel (DRIVECOM profile)
39
L
EDS84DPBUS EN 2.0 - 09/2010
8.2.2.3 Data transfer abort by the controller
The error telegram is used to abort the transfer.
 The error telegram is marked by a set status bit in the service byte.
 The telegram can either be effected as a response to an "Initiate Read/Write Service or
to a Read/Write Segment Service".
Controller response in case of an error:
8.2.2.4 Data transfer abort by the master
With this telegram, the master is able to abort a running segment transmission.
 The error telegram is marked by a set status bit in the service byte.
 The service byte also contains the request code "4" (100
bin
).
 Bit 4 and bit 5 in the service byte (data length) are without meaning.
 Additional information (subindex, index, error information) is not transmitted.
Controller response in case of faultless execution:
The controller confirms the error telegram of the master by also sending an error telegram.
 The error telegram is marked by a set status bit in the service byte.
 In case of faultless execution, the telegram contains the error information
"0x00000000" in bytes 5 ... 8.
 Additional information (subindex, index) is not transmitted.
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
Service Subindex Index
High byte
Index
Low byte
Data 4 /
Error 4
Data 3 /
Error 3
Data 2 /
Error 2
Data 1 /
Error 1
1t110000 SIDX IDXH IDXL Error Class Error code Additional
Code High
Additional
Code Low
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
Service Reserved Reserved Reserved Reserved Reserved Reserved Reserved
1txx0100 0 0 0 0 0 0 0
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
Service SIDX IDXH IDXL Error Class Error code Additional
Code High
Additional
Code Low
1t110000 0 0 0 0 0 0 0