Lenze E84Dxxxx - Manual (Page 76)

EDS84DPBUS EN 2.0 - 09/2010
L
76
Communication manual 8400 protec PROFIBUS
Error messages
Possible causes and remedies
Internal error [0x01bc6011]
Internal error [0x01bc6100]
Internal error [0x01bc6101]
Internal error [0x01bc6110]
Invalid parameter set [0x01bc641f]
Error: Lenze settings loaded [0x01bc6420]
Response (Lenze setting printed in bold) Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Device is defective. Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold) Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold) Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold) Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold) Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
No active parameter set could be loaded. Repeat download of the application (including module).
Response (Lenze setting printed in bold) Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Access to the parameter set in the memory module via
standard device failed.
Repeat download of the application (including module).