12 error messages, Error messages, Communication manual 8400 protec profibus – Lenze E84Dxxxx User Manual
Page 74
EDS84DPBUS EN 2.0 - 09/2010
L
74
Communication manual 8400 protec PROFIBUS
Error messages
Short overview (A-Z) of the PROFIBUS-error messages
12
Error messages
This chapter complements the error list in the software manual and the »Engineer« online
help for the Inverter Drive 8400 protec by PROFIBUS error messages.
12.1
Short overview (A-Z) of the PROFIBUS-error messages
The following table contains all PROFIBUS error messages in alphabetical order with the
preset error response as well as – if applicable – the parameter for setting the error
response.
Tip!
When you click the cross-reference in the last column, you will see a detailed
description (causes and remedies) of this error message.
Software manual/»Engineer« online help for the Inverter Drive 8400 protec
Here you will find general information on diagnostics & fault analysis and error
messages.
Error text
Error type
Subject area
no.
Error no.
Adjustable
in
Detailed
information
Connection to 8400 standard device lost
1: Error
444
12544
-
Error: Lenze settings loaded
1: Error
444
25632
-
Internal error
1: Error
444
24832
-
Internal error
1: Error
444
24833
-
Internal error
1: Error
444
24848
-
Internal error
1: Error
444
24593
-
Invalid parameter set
1: Error
444
25631
-
Memory: Read error
1: Error
444
21810
-
Memory: Write error
1: Error
444
21811
-
Memory: No access
1: Error
444
21809
-
Profibus: "Data_Exchange" status exited
0: No response
444
33073
Profibus watchdog: DP-V1 MSC2 monitoring time
exceeded
0: No response
444
33074
Profibus watchdog: Monitoring time expired
0: No response
444
33072
Restart after watchdog reset
1: Error
444
24592
-
Safety communication timeout
4: Warning locked
444
26128
-
Safety Init error
4: Warning locked
444
26130
-
Safety parameter timeout
4: Warning locked
444
26129
-