2 possible causes and remedies, Memory: no access [0x01bc5531, Memory: read error [0x01bc5532 – Lenze E84Dxxxx User Manual
Page 75: Memory: write error [0x01bc5533, Restart after watchdog reset [0x01bc6010, Possible causes and remedies, 0x01bc3100, 0x01bc5532, 0x01bc5533, 0x01bc5531
Communication manual 8400 protec PROFIBUS
Error messages
Possible causes and remedies
75
L
EDS84DPBUS EN 2.0 - 09/2010
12.2
Possible causes and remedies
This chapter contains all PROFIBUS error messages in numerical order of the error number.
Possible causes and remedies as well as responses to the error messages are described in
detail.
Tip!
An alphabetical listing of all PROFIBUS-error messages can be found in the previous
chapter "
Short overview (A-Z) of the PROFIBUS-error messages
Connection to 8400 standard device lost [0x01bc3100]
Memory: No access [0x01bc5531]
Memory: Read error [0x01bc5532]
Memory: Write error [0x01bc5533]
Restart after watchdog reset [0x01bc6010]
Response (Lenze setting printed in bold)
Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause
Remedy
• Network cable (plug) is defective.
• Network cable is not connected toPROFIBUS
connection X31/X32.
• Voltage supply is interrupted.
Check cables and terminals.
Connect network cable to PROFIBUS connection X31/
X32.
Response (Lenze setting printed in bold)
Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause
Remedy
Access to memory was not possible.
Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold)
Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause
Remedy
Parameter could not be read.
Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold)
Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause
Remedy
Parameter could not be written.
Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold)
Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause
Remedy
Device is defective.
Send the device and a description of the fault to Lenze.