SATEC EM920 Operation Manual - Manual (Page 135)

Chapter 5 Configuring the EM920
Configuring Meter Passwords
EM920 Power Quality and Revenue Meter 135
The present passwords settings are never uploaded from the
meter via the Passwords setup. When you open the dialog, all
passwords are zeroed.
To setup new passwords:
1. Enter the first (lower-level) password in the “Password
1” box and repeat it in the following “Confirm
password” box.
2. In the same manner, enter Password 2 and Password
3 for the medium and high-level security passwords.
3. Click “Save as” to save the passwords to the site
database. The passwords are stored in an encrypted
form.
4. Click “Send” to update passwords in your meter.
To setup a password online:
1. From the Monitor menu, select Administration ->
Change Password, and then click on the password you
wish to change.
2. Enter the new password and repeat it in the following
“Confirm new password” box.
3. Click Send to update the password in the meter.