SATEC EM920 Operation Manual - Manual (Page 55)

Chapter 4 Using PAS Software
Creating a New Site for your Meter
EM920 Power Quality and Revenue Meter 55
The next time you power up the EM920 or connect it to your
PC with the USB cable, Windows automatically launches the
driver for your meter.
Creating a New Site for your Meter
PAS keeps all communication and configuration data for your
meter in a configuration database called a site database.
During configuration store all setup data to the site database
so that PAS recognizes device properties regardless of
whether your meter is online or offline.
To create a new database for your meter:
1. Select Configuration from the Tools menu.
2. Click the Sites button on the right-hand-side.
3. From the “Look in” box, select the directory where a
new database will be stored. By default, it will be the