Device diagnostics display, In chapter 3 on – SATEC EM920 Operation Manual User Manual
Page 47
Chapter 3 Using Front Display
Data Displays
EM920 Power Quality and Revenue Meter
47
Device Diagnostics Display
The diagnostics display shows device diagnostic messages
recorded as a result of the meter self-test diagnostics during
start-up and operation.
If there are more pages, use a short press on the
SCROLL button to scroll through the entire list of
messages.
Extended press SCROLL + SELECT/ENTER is a
shortcut for immediate entering the password-
protected diagnostics reset menu.
If there are diagnostic messages, the
diagnostic icon on
the status bar flashes until you clear the device diagnostics.
Some of the diagnostics events are cleared automatically as
the event source disappears. See
Device Diagnostic Codes
in
Appendix H for a full list of diagnostic messages and their
meanings. See
Clearing Device Diagnostics
for information on
how to clear the device diagnostics from the display and via
PAS.
The diagnostic icon can be disabled or enabled via the