SATEC EM920 Operation Manual - Manual (Page 50)

Chapter 3 Using Front Display
Programming Mode
50 EM920 Power Quality and Revenue Meter
NOTE
Access to the Reset menu entries is allowed depending on
your security level as shown in Section
Reset of Accumulators
and Log Files in Chapter 6.
If your security level does not allow access to a menu, it will
not be listed in the main menu list, and you will not be able
to highlight menu items that you are not allowed to change,
but you can still view their present settings.
Viewing and Changing Setup Options
Once you entered a correct password you are moved to the
main meter menu.
The main menu has two windows: the left window displays a
submenu list, while the right window is an assisting Exit
window that allows easy returning back to the data display. A
currently active menu item is highlighted by inversed color.
To select a desired menu entry from the menu list:
1. If the left window is not highlighted yet, highlight it by
briefly pressing the SELECT/ENTER button.
2. Use the SCROLL button to scroll through the menu list
until the desired menu entry appears.
3. Press the SELECT/ENTER button for more than 1
second to enter the selected submenu.
Once you entered a submenu, the left window is still showing
the menu name, while the upper-right window represent a
submenu options list, and the lower-right window indicates
the present option value.
To select an option you want to view or change:
Use the SCROLL button to scroll through the option list until
the desired option’s name appears in the window.
To change the selected option’s value:
1. Press the SELECT/ENTER button briefly to highlight the
lower-right window.
2. If an option is represented by a list of values, use the
SCROLL button to scroll through the list until a desired
value appears in the window. It an option is
represented by a numeric value, use the SCROLL
button to adjust each digit to the desired value, and
use a short press on the SELECT/ENTER button to
move through digits.
3. Once the desired value is selected, press the
SELECT/ENTER button for more than 1 second to save
your new setting. You return to the upper-right
window and can continue scrolling through the rest of
options or can return to the main menu.
If you wish to leave the option value unchanged, use a short
press on the SELECT/ENTER button to return to the upper-
right window.
LONG PRESS ENTER
SCROLL
SHORT PRESS SELECT
LONG PRESS ENTER