Example routine, Example results – Rockwell Automation 56RF RFID System User Manual User Manual
Page 107
Advertising
Rockwell Automation Publication 56RF-UM001A-EN-P - October 2011
107
RSLogix 5000 Code Examples
Chapter 9
Example Routine
In the example below, 4 bytes of data will be written to Block 3. The data is
loaded into the output channel image table. Block three will be populated with
Data[0…3] = 41, 42, 43, and 44.
Example Results
The output image table shows that the address is set to Block 3; the block size is 4
and the command is 10. The data to be written to block 3 is 41, 42, 43, and 44.
Advertising