Rockwell Automation 56RF RFID System User Manual - Manual (Page 83)

Rockwell Automation Publication 56RF-UM001A-EN-P - October 2011 83
RSLogix 5000 Code Examples Chapter 9
Example Results
The output image table shows address 26. This is the second to last block of the
Cat. No. 56RF-TG-30 tag. The command is 40. The UUID must be specified to
lock any blocks.
After completion of the lock block command, the input image table should show
the command is 40 and the ChError is 0.
Errors
The ChErrorfield will show will be 8 if you try to lock a block that is already
locked.