Rockwell Automation 56RF RFID System User Manual - Manual (Page 127)

Rockwell Automation Publication 56RF-UM001A-EN-P - October 2011 127
RFID Interface Block Web Page Chapter 13
EtherNet Statistics
I/O Connections
Configuration To access the configuration section of the RFID interface block web page, a
username and password are required. The default username is “Admin”, and there
is no password by default. The username and password can be changed on the
Device Services tab.
Note: If the username and password are lost, the interface block must be reset to
default before it can be accessed again. This will reset the username and password
to the default values above.