Rockwell Automation 56RF RFID System User Manual - Manual (Page 52)

52 Rockwell Automation Publication 56RF-UM001A-EN-P - October 2011
Chapter 6 Add Your RFID Interface Block to an RSLogix 5000 Program
EtherNet Address
When the controller is offline, the EtherNet address can be set. The user has three
options.
1. When a Private Network is used, click on the Private Network radio
button. Enter a value for the last octet between 1…254. Be sure not to
duplicate the address of an existing device. In preceding example, the
address of the RFID block is 192.168.1.115.
2. When multiple networks exist, the user may elect to set the address to
some other value. When offline, simply click the IP Address radio button
and enter the desired address.
3. Click the Host Name radio button and type in the name of the host. In the
example below, the Host name is QPACK4.