Rockwell Automation 56RF RFID System User Manual - Manual (Page 40)

40 Rockwell Automation Publication 56RF-UM001A-EN-P - October 2011
Chapter 4 EtherNet/IP Addressing
Double-click on one of the EtherNet Address (MAC) of the device. The New
Entry dialog appears showing the EtherNet Address (MAC) of the device.
Type in the IP Address, Hostname and Description and click OK. The
Hostname and Description are optional fields; they can be left blank.
The device is added to the Relation List, displaying the EtherNet Address
(MAC) and corresponding IP Address, Hostname, and Description.
When the address is assigned to the Bul. 56RF interface block, 1) the Status
message is updated, and 2) the IP address appears in the Request History
window.
4. At this point, the IP addresses of other devices should be changed.
IMPORTANT Wait for the Status message to show “Sent 192.168.2.115 to EtherNet
address 00:00:BC:E5:D0:1D.” This may take a few seconds to 30
seconds.