Rockwell Automation 56RF RFID System User Manual - Manual (Page 89)

Rockwell Automation Publication 56RF-UM001A-EN-P - October 2011 89
RSLogix 5000 Code Examples Chapter 9
Example Routine
In the example routine below, the initialization in Rung 1 sets the address, length,
the Data[0] value used to read multiple tags and sets the command value to 0.
The BlockSize, Reset, Timeout, UIDLow, and UIDHi are set to 0 in the output
image table.
The example ladder diagram is initially set for Address =25 and the Length = 2.
The command will read blocks 25 and 26.