Rockwell Automation 56RF RFID System User Manual - Manual (Page 147)

Rockwell Automation Publication 56RF-UM001A-EN-P - October 2011 147
CIP Information Appendix B
The following common services are implemented for the Discrete Output Point
Object.
To obtain the state of an output point, configure a CIP message as shown below:
The return value will contain the state of the output (0=Off, 1=On)
To set the state of an output point, configure a CIP message as shown below:
CIP_Data_Source is a SINT that will contain the value to set the output too
(0=Off, 1=On).
Service Code Implemented for: Service Name
Class Instance
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single