Rockwell Automation 1762-Lxxxx MicroLogix 1200 Programmable Controllers - Manual (Page 10)

Publication 1762-UM001G-EN-P - March 2011
P-2 Preface
Related Documentation
The following documents contain additional information concerning Rockwell
Automation products. To obtain a copy, contact your local
Rockwell Automation office or distributor.
Common Techniques Used
in This Manual The following conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not procedural steps.
• Numbered lists provide sequential steps or hierarchical information.
Resource Description
MicroLogix 1200 and 1500 Programmable Controllers
Instruction Set Reference Manual, publication
1762-RM001 Information on the MicroLogix 1200 Controllers instruction set.
MicroLogix 1200 Programmable Controllers Installation
Instructions, publication 1762-IN006 Information on mounting and wiring the MicroLogix 1200 Controllers, including
a mounting template for easy installation.
Advanced Interface Converter (AIC+) User Manual,
publication 1761-UM004 A description on how to install and connect an AIC+. This manual also
contains information on network wiring.
DeviceNet Interface User Manual, publication
1761-UM005 Information on how to install, configure, and commission a DNI.
DF1 Protocol and Command Set Reference Manual,
publication 1770-6.5.16 Information on DF1 open protocol.
Modbus Protocol Specifications available from
www.modbus.org Information about the Modbus protocol.
Allen-Bradley Programmable Controller Grounding and
Wiring Guidelines, publication 1770-4.1 In-depth information on grounding and wiring Allen-Bradley programmable
controllers.
Application Considerations for Solid-State Controls,
publication SGI-1.1 A description of important differences between solid-state programmable
controller products and hard-wired electromechanical devices.
National Electrical Code - Published by the National Fire
Protection Association of Boston, MA. An article on wire sizes and types for grounding electrical equipment.
Allen-Bradley Industrial Automation Glossary,
publication AG-7.1 A glossary of industrial automation terms and abbreviations.