Rockwell Automation 1762-Lxxxx MicroLogix 1200 Programmable Controllers - Manual (Page 81)

Publication 1762-UM001G-EN-P - March 2011
Communication Connections 4-15
1761-CBL-PM02 Series C (or equivalent) Cable Wiring Diagram
Recommended User-supplied Components
These components can be purchased from your local electronics supplier.
Cable Length Connections from to AIC+ External
Power Supply
Required
(1)
Power
Selection
Switch
Setting
(1)
1761-CBL-AS03
1761-CBL-AS09 3m (9.8 ft)
9.5m (31.17 ft) SLC 500 Fixed,
SLC 5/01, SLC 5/02, and SLC 5/03
processors port 3 yes external
PanelView 550 RJ45 port port 3 yes external
(1) External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.
Table 4.7 User Supplied Components
Component Recommended Model
external power supply and chassis ground power supply rated for 20.4 to 28.8V dc
NULL modem adapter standard AT
straight 9-25 pin RS-232 cable see table below for port information if
making own cables
Programming
Device Controller
9-Pin D-Shell 8-Pin Mini Din
9 RI 24V 1
8 CTS GND 2
7 RTS RTS 3
6 DSR RXD 4
5 GND DCD 5
4 DTR CTS 6
3 TXD TXD 7
2 RXD GND 8
1 DCD