Rockwell Automation 1762-Lxxxx MicroLogix 1200 Programmable Controllers - Manual (Page 102)

Publication 1762-UM001G-EN-P - March 2011
A-10 Specifications
On-state current, min. 5.0 mA at 79V ac 47 Hz 2.0 mA at 10V dc 2.0 mA at 10V dc 1.6 mA at 10V dc
2.0 mA at 15V dc
On-state current, nom. 12.0 mA at 120V ac 60 Hz 8.0 mA at 24V dc 8.0 mA at 24V dc -
On-state current, max. 16.0 mA at 132V ac 63 Hz 12.0 mA at 30V dc 12.0 mA at 30V dc 5.7 mA at 26.4V dc
6.5 mA at 30.0V dc
Inrush current, max. 250 mA Not applicable Not applicable Not applicable
Nominal impedance 12K Ω at 50 Hz
10K Ω at 60 Hz
3K
Ω
3K
Ω
4.7K
Ω
Power supply distance
rating 6 (The module may not be located more than 6 modules away from the power supply.)
IEC input compatibility Type 1+ Type 1+ Type 1+ Type 1
Isolated groups Group 1: inputs 0 to 7
(internally connected
commons) Group 1: inputs 0 to 7
(internally connected
commons) Group 1: inputs 0 to 7;
Group 2: inputs 8 to 15 Group 1: Inputs 0…7;
Group 2: Inputs 8…15;
Group 3: Inputs 16…23;
Group 4: Inputs 24…31
Input group to backplane
isolation Verified by one of the
following dielectric tests:
1517V ac for 1 s or
2145V dc for 1 s.
132V ac working voltage
(IEC Class 2 reinforced
insulation) Verified by one of the following dielectric tests:
1200V ac for 1 s or 1697V dc for 1 s.
75V dc working voltage (IEC Class 2 reinforced
insulation) Verified by one of the
following dielectric tests:
1200V ac for 2 s or
1697V dc for 2 s
75V dc working voltage
(IEC Class 2 reinforced
insulation)
Vendor I.D. code 1
Product type code 7
Product code 114 96 97 99
(1) Sinking/Sourcing Inputs - Sourcing/sinking describes the current flow between the I/O module and the field device. Sourcing I/O circuits supply (source) current to sinking
field devices. Sinking I/O circuits are driven by a current sourcing field device. Field devices connected to the negative side (DC Common) of the field power supply are
sinking field devices. Field devices connected to the positive side (+V) of the field supply are sourcing field devices.
(2) Refer to Publication 1762-IN10 , MicroLogix 1762-IQ16 DC Input Module Installation Instructions, for the derating chart.
(3) Only applicable to Series B I/O modules.
Table A.13 Input Specifications
Attribute Value
1762-IA8 1762-IQ8 1762-IQ16 1762-IQ32T
Table A.14 Output Specifications
Specification 1762-OA8 1762-OB8 1762-OB16 1762-OB32T
Shipping weight, approx.
(with carton) 215 g (0.48 lbs.) 210 g (0.46 lbs.) 235 g (0.52 lbs.) 200 g (0.44 lbs.)
Voltage category 100…240V ac 24V dc 24V dc 24V dc source
Operating voltage range 85…265V ac at 47 to 63
Hz 20.4…26.4V dc 20.4…26.4V dc 10.2…26.4V dc
Number of outputs 8 8 16 32