Rockwell Automation 1762-Lxxxx MicroLogix 1200 Programmable Controllers User Manual
Page 34
Advertising
![background image](/manuals/579183/34/background.png)
Publication 1762-UM001G-EN-P - March 2011
2-20 Install Your Controller
WARNING
EXPLOSION HAZARD
In Class I, Division 2 applications, the bus connector
must be fully seated and the bus connector cover
must be snapped in place.
In Class I, Division 2 applications, all modules must
be mounted in direct contact with each other as
shown on page 2-19. If DIN rail mounting is used, an end
stop must be installed ahead of the controller and after the
last 1762 I/O module.
Advertising
This manual is related to the following products: