Rockwell Automation 1762-Lxxxx MicroLogix 1200 Programmable Controllers - Manual (Page 80)

Publication 1762-UM001G-EN-P - March 2011
4-14 Communication Connections
Table 4.6
Cable Length Connections from to AIC+ External
Power Supply
Required
(2)
Power
Selection
Switch
Settings
1761-CBL-AM00
(1)
1761-CBL-HM02
(1)
45 cm (17.7 in)
2m (6.5 ft) MicroLogix 1000, 1200, or 1500 port 2 no cable
to port 2 on another AIC+ port 2 yes external
(1) Series C or higher cables are required.
(2) External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.
1761-CBL-AC00
1747-CP3
Cable Length Connections from to AIC+ External
Power Supply
Required
(1)
Power
Selection
Switch
Setting
(1)
1747-CP3
1761-CBL-AC00
(1)
3m (9.8 ft)
45 cm (17.7 in) SLC 5/03 or SLC 5/04 processor, channel
0 port 1 yes external
PC COM port port 1 yes external
PanelView 550 through NULL modem
adapter port 1 yes external
DTAM Plus / DTAM Micro port 1 yes external
Port 1 on another AIC+ port 1 yes external
(1) External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.
user-supplied cable
Cable Length Connections from to AIC+ External
Power Supply
Required
(1)
Power
Selection
Switch
Setting
(1)
straight 9-25 pin — modem or other communication device port 1 yes external
(1) External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.
1761-CBL-AS03
1761-CBL-AS09