Rockwell Automation 1775-S5_SR5,D17756.5.5 User Manual PLC-3 FAMILY I/0 User Manual
Page 14
Advertising
![background image](/manuals/579813/14/background.png)
Scanner Hardware and Installation
Chapter 1
1-5
DH/DH+ Status Indicators
The five indicators labeled XMTG, RCVG, RDY, ERR, and DIS
(Figure 1.2) show you the status of the DH or DH+ channel.
Indicator
Color
When this led is on, (the scanner is)
XMTG
green
transmitting a message.
RCVG
green
receiving a message.
RDY
green
ready to transmit a message.
ERR
red
programming or communication error detected.
DIS
yellow
DH/DH+ connectors are disabled or duplicate
DH+ station address if blinking.
When the scanner is polling, both the XMTG and RCVG LEDs turn on.
Figure 1.2
Indicator Locations for 1775ĆS5 and 1775ĆSR5 Scanner Modules
Thumbwheel switch
1775ĆS5
Scanner
1775ĆSR5
Scanner
Advertising