Rockwell Automation 1775-S5_SR5,D17756.5.5 User Manual PLC-3 FAMILY I/0 - Manual (Page 43)

Configuring the Scanner through LIST
Chapter 2
2-17
To add a station address and input file to the list, enter a colon (:) followed
by the station address, a space, and the input file number. For example:
INPUT FILE LIST
STATION FILE
:0 2
:5 2
:64 6
:65 7
1:37 4
ENTER STATION AND INPUT FILE #> :6 4
You can specify an octal station number by starting it with a leading 0.
Otherwise, the scanner treats it as a decimal number. The file number is
always treated as a decimal number.
To specify station addresses for stations on remote links, you can enter:
link:node
To remove a station from the list, enter the station number followed by /D .
For example:
ENTER STATION AND INPUT FILE #> 1:37/D
This example removes link 1, station number 37 from the input file list.
Another example:
ENTER STATION AND INPUT FILE #> :5/D
This example removes station number 5 from the input file list.
9 - Privileges
Select the Privileges option from the configuration screen to select
operating parameters for the DH/DH+ communication channel. These
operating parameters are called privileges.
For example, you must have privilege 4 selected in order to enter and edit a
ladder program. If you want to protect your ladder program from editing,
you could deselect privilege 4. Another user could still monitor or read
your ladder program, but could not alter it.