Installing dtam plus programming software – Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL User Manual
Page 15
Advertising
![background image](/manuals/580272/15/background.png)
Chapter 4
Installing DTAM Plus Programming Software
4–2
5. Press any key (other than [Esc]) to continue.
This screen displays.
6. Use the [
"#] arrow keys to highlight the drive on which you want to
install the DTAM Plus Programming Software and then press [Return].
The default drive is C:
This screen appears.
Installing DTAM Plus
Programming Software
☞ You cannot install the software
on the same drive the Install
program resides.
Advertising