Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 43)

Chapter 5
Creating a Sample Application
5–27
Data Entry (Screen 40)
1. Press the [F8] function key to start a new screen.
The screen prompts you for a new screen number.
2. Type 40 and press [Return].
The screen clears the previous display and prompts you to enter a
screen type.
3. Highlight Data Entry Screen and press [Return].
4. Enter the following data in the display window:
Enter 4 spaces, type Enter 60 to and press [Return]
Enter 2 spaces, type simulate an alarm and press [Return]
Enter 4 spaces, type Advisor: 0 and press [Return]
Enter 1 space, type Data Entry: and press [Return]
The screen should look like this.
Note: You will now enter a data entry register for screen 40.