Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL User Manual
Page 39
Advertising
Chapter 5
Creating a Sample Application
5–23
15. Use the [
#] arrow key to move the cursor to row 3, column 15 of
the display window.
16. Press [F1] (Display Register).
The screen displays a list of register types.
17. Highlight 16 Bit Signed Integer and press [Return].
The 16 Bit Signed Integer Display appears.
18. Use the arrow [
"#] and [Return] keys to enter the register data below.
Arrows
indicate
changes
19. Press [Esc] after entering the register data.
The data display window shows 3 asterisks (***) in row 3 indicating the
data register position.
Continue to the next section to create Data Entry 21.
☞ Steps 15 – 19 define the data
register for line 3 of Screen 29.
Advertising