Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 31)

Chapter 5
Creating a Sample Application
5–15
5. Use the [
"#][{] arrow keys to move the cursor to row 2, column 4 of
the display window.
6. Press [F1] (Display Register).
The screen displays a list of register types.
7. Press [Return] to select Bit.
The Bit Display appears.
8. Use the arrow [
"#] and [Return] keys to enter the following register data.
Arrows
indicate
changes
9. Press [Esc] after entering the register data.
The data display window shows 12 asterisks in row 2 indicating the
data register position.
Continue to the next section to create Data Display 27.
☞ Steps 5 – 9 define the data
register for Mixer Status