Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 45)

Chapter 5
Creating a Sample Application
5–29
Security Screen (39)
1. Press [F8] to start a new screen.
The screen prompts you for a new screen number.
2. Type 39 and press [Return].
You are prompted for a screen type.
3. Highlight Security Screen and press [Return].
This screen appears.
4. Enter the following access codes in the Security Codes window.
Code 1 = 1234 [Return]
Code 2 = 5678 [Return]
Code 3 = 1992 [Return]
5. Press [Esc] to accept the codes.
The screen should look like this. No other changes are required.
The application will use the default text in the window.
Continue to the next section to create a Bar Graph screen.