Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 63)

Chapter 6
Downloading the Application
6–3
This section shows how to download the sample application from your
computer to the DTAM Plus.
1. Apply power to the DTAM Plus.
The following message appears in the window of the DTAM Plus.
Waiting For Program
Upload / Download
Programming Mode
If you do not see this message, check the DIP switch settings.
DIP Switch 1 must be in the Closed (ON) position.
2. Move to the /DPS subdirectory where the software resides.
C:\DPS>
3. Type dps and press [Return] to start the program.
C:\DPS>dps [Return]
4. Specify whether you are using a color monitor. Enter Y or N.
5. The startup screen displays. It identifies the DPS version and licensed
owner. A phone support number is provided for your assistance.
Downloading
the Application
. You will not see this prompt if
a monitor was specified during
installation.