Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 22)

Chapter 5
Creating a Sample Application
5–6
5. Use the arrow [
↓↑
] keys to highlight SLC Hardware Parameters and
press [Return].
The SLC 500 Configuration menu appears.
6. Press [Return] to select COM Port Setup.
The SLC COM Port Communication Parameters screen appears with the
current baud rate, parity and data bit settings displayed at the bottom.
The port must be set for 19200 baud rate, even parity, 8 data bits.
If necessary, modify the settings by selecting the appropriate menu item.
The screen then displays a list of options for the selected parameter. Use
the [
↓↑
] arrow keys to highlight the correct setting and press [Return].
7. Press [Esc] to return to the SLC 500 Configuration menu.