Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 46)

Chapter 5
Creating a Sample Application
5–30
Bar Graph Screen (11)
1. Press [F8] to start a new screen.
The screen prompts you for a screen number.
2. Type 11 and press [Return].
You are prompted to enter a screen type.
3. Highlight BarGraph Screen and press [Return].
The screen prompts you for a register type.
4. Press [Return] to select 16 Bit Signed Integer.
The screen now looks like this.
5. Use the arrow [
"#] and [Return] keys to enter the following register data.
Arrows
indicate
changes