Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL User Manual
Page 47
Advertising
![background image](/manuals/580272/47/background.png)
Chapter 5
Creating a Sample Application
5–31
6. Press [Esc] after entering the register data.
Notice how the values have been applied to the bar graph.
7. Enter the following text in the display window:
Type East Main Pump Speed.
Enter 5 spaces, type RPM and press [Return]
With the entered text, the display window looks like this.
8. Position the cursor at row 2, column 1 (5 spaces to the left of RPM).
9. Press [F1] (Display Bar Register).
You should see 4 asterisks (****) before RPM indicating a data register.
Continue to the next section to create Recipe Screen 28.
Advertising