Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL User Manual
Page 26
Advertising
Chapter 5
Creating a Sample Application
5–10
Sub-Menu (Screen 20)
1. Press the [F8] function key to start a new screen.
The screen prompts you for a new screen number.
2. Type 20 and press [Return]. This is the number for the Sub-Menu.
The Main Menu clears and the screen displays a list of screen types.
3. Press [Return] to select Sub-Menu Screen.
4. Enter the following data for the Sub-Menu. Press [Return] after
entering each line:
1 Tank Temp Desired
2 Tank Level
3 Mixer Status
You have just created the Sub-Menu. It should look like this.
Continue to the next section to create Data Display 22.
Advertising